· Water-based ultra-fine organic pigment with the polymer dispersant · 2011 exterior house paint market development of three major trends · Architectural coatings inadequate supply of quality products · Coatings industry, the introduction of the 2011 top ten policies promulgated a series of industry-standard
  Vehicle paint
  Industrial paint
  Coiled material paints
  Woodenware paints
  Anti-corrosive paints
  UV photocuring paints
  General color paste
+ Address: Xizhang Tianrunyuan 8-6, Huishang District, Wuxi
+ Tel:+86-0510-81988298
+ Fax:+86-510-83508359
+ Http://www.neoadditive.com
+ E-mail:sales@neoadditive.com

Used for the coil coatings auxiliaries recommended
Type Model number Properties Characteristics Dosage
1,Dispersing agents
Titanium white powder and inorganic pigments NEO-1510 Middle molecular polyurethane High performance of dispersion and viscosity reduction, obvious settlement prevention and resistance of floating color and blur. 1-4%(for pigments)
Organic pigments and carbon black NEO-1101 Acid macro molecular polyurethane

Acidic features without influence on acid catalysis efficiency;
Favorable dispersion and stabilization effects for organic pigments and carbon black.

20-150%(for pigments)
NEO-1103 Acid macro molecular polyurethane

Acidic features with high cost performance.

20-150%(for pigments)

Macro molecular polyurethane

Favorable dispersion and stability effects for organic pigment and carbon black hard to dispersed. 20-150%(for pigments)
NEO-1222 Polyurethane with special structure

Excellent viscosity reduction, stabilization and color phase for carbon black;

Favorable dispersion and stabilization for organic pigments.
20-150%(for pigments)
经济型比特币交易网站 NEO-1604

Amphoteric wetting dispersing agents

Exclusive use for base and back paint; favorable pigment wetting property and viscosity reduction.
Special dispersing agents used for primary carbon black, such as C311;

0.5-10%(for pigments)
NEO-1730 Exclusive dispersing agents for carbon blac Excellent viscosity reduction, good carbon black color phase and high stability. 10-40%(for carbon black)
共研磨 NEO-1665

Acid wetting agent containing silicon

Notable effect for preventing floating color and blur for co-grinding, and valid as added later.

0.1-0.5%(for formula)

Acid wetting agent

Good co-grinding effects for preventing floating color and blur, and high cost performance.

0.1-0.5%(for formula)
NEO-1667 Acid wetting agent containing silicon Excellent color expanding, floating color and blur preventing performances. 0.1-0.5%(for formula)
2,Leveling agents
Polyacrylic ester NEO-3054 Polyacrylic ester

Excellent long wave leveling and defoaming effects.

0.2-0.8%(for formula)
NEO-3055 Polyacrylic ester High leveling speed and good foam breaking effects. 0.2-0.8%(for formula)
Fluorine modified Polyacrylic ester NEO-3170 Fluorine modified Polyacrylic ester

Excellent long wave leveling effect and defoaming capability.

0.2-0.8%(for formula)

Fluorine modified polyacrylic ester

Excellent wetting property of base material, leveling performance and orientation effect for aluminum powder.

0.3-1.0%(for formula)
NEO-3778 Fluorine modified polyacrylic ester Reinforced type of NEO-3177, with high leveling speed and reinforced effects. 0.3-1.0%(for formula)
Organic silicon NEO-3042 Fluorine carbon, polyether modified organic silicon

Organic silicon

Excellent leveling performance, high leveling speed and favorable wetting property of base material;
favorable shrink cavity, oil fouling and heat resistance.

0.1-0.5%(for formula)
NEO-3606 Aralkyl modified organic silicon Excellent aluminum powder and pearl powder orientation, defoaming performance and high smoothness. 0.05-0.2%(for formula)
3,Defoaming agents
Polymer NEO-5070 Non-silicon polymer Special effects for epoxy systems, favorable defoaming performance and high safety. 0.2-0.8%(for formula)
4,Acid catalyst
Acid catalyst NEO-8925

Closed dodecylbenzene sulfonic acid

High catalysis efficiency, high compatibility and brilliancy.

0.1-1.0%(for formula)
NEO-8945 Closed para-toluenesulfonic acid High catalysis efficiency, with the minimum unsealing temperature of 80℃. 0.1-1.0%(for formula)
Adhesive force acceleran NEO-8980

Epoxy phosphoric acid ester

High compatibility and obvious adhesive force improvement for metal base material;
Notable effects of acid catalysis solidification.

0.5-2.0%(for formula)
NEO-8982 Epoxy phosphoric acid ester High performance for improving adhesive force of metal base material;
notable improvement of abrasion resistance for baking pre-coating.
1-5%(for formula)


Copyright ◎ 2011 Wuxi NEO Chemical Material Co.,Ltd All reserved.Address: Xizhang Tianrunyuan 8-6, Huishang District, Wuxi
Zip code:214000  Tel:+86-0510-81988298(Switchboard) Http://www.neoadditive.com E-mail:sales@neoadditive.com