· Water-based ultra-fine organic pigment with the polymer dispersant · 2011 exterior house paint market development of three major trends · Architectural coatings inadequate supply of quality products · Coatings industry, the introduction of the 2011 top ten policies promulgated a series of industry-standard
 
  Vehicle paint
  Industrial paint
  Coiled material paints
  Woodenware paints
  Anti-corrosive paints
  UV photocuring paints
  General color paste
 
+ Address: Xizhang Tianrunyuan 8-6, Huishang District, Wuxi
+ Tel:+86-0510-81988298
  (Switchboard)
+ Fax:+86-510-83508359
+ Http://www.neoadditive.com
+ E-mail:sales@neoadditive.com

Used for the anti-corrosion coatings auxiliaries recommended
Type Model number Properties Characteristics Dosage
1,Dispersing agents
Titanium white powder and inorganic pigments NEO-1503

Acidic polymer

High dispersion whiteness as used for titanium white powder;


obvious viscosity deduction, excellent leveling performance and high brilliancy.

1-4%(for pigments)
NEO-1510 Middle molecular polyurethane High performance of dispersion and viscosity reduction, obvious settlement prevention and resistance of floating color and blur. 1-4%(for pigments)
Organic pigments and carbon black NEO-1101

Acid macro molecular polyurethane

With acid quality, no influence on storing stability of epoxy systems;
Favorable dispersion and stabilization effects for organic pigments and carbon black.

20-150%(for pigments)
NEO-1103

Acid macro molecular polyurethane

Acidic features with high cost performance 20-150%(for pigments)
NEO-1203

Macro molecular polyurethane

Favorable dispersion and stability effects for organic pigment and carbon black hard to dispersed.

20-150%(for pigments)
NEO-1222 Polyurethane with special structure

Excellent viscosity reduction, stabilization and color phase for carbon black;
Favorable dispersion and stabilization for organic pigments.

20-150%(for pigments)
Economic type dispersing agents NEO-1604 Amphoteric wetting dispersing agents

Versatility and good pigment wetting property.
Exclusive use for alcohol aid systems, with high cost performance.

0.5-10%(for pigments)
NEO-1607

Wetting dispersing agents

Special dispersing agents used for primary carbon black, such as C311;
Excellent viscosity reduction, good carbon black color phase and high stability.

0.5-10%(for pigments)
NEO-1730 Exclusive dispersing agents for carbon black Inapplicability for epoxy systems. 10-40%(for carbon black))
Co-grinding NEO-1665 Acid wetting agent containing silicon

Notable effect for preventing floating color and blur for co-grinding, and valid as added later.

0.1-0.5%(for formula)
NEO-1667 Acid wetting agent containing silicon Excellent color expanding, floating color and blur preventing performances. 0.1-0.5%(for formula)
2,Leveling agents
Polyacrylic ester NEO-3054 NEO-3055

Polyacrylic ester

Excellent long wave leveling and defoaming effects.
High leveling speed and good foam breaking effects.

0.2-0.8%(for formula) 0.2-0.8%(for formula)
Fluorine modified polyacrylic ester NEO-3166

Fluorine carbon superpolymer

High shrink cavity resistance, leveling speed and oil fouling resistance;


Favorable equivalent pigment orientation effects for aluminum powder, even for brush coating.

0.1-0.5%(for formula)
NEO-3170 Fluorine modified polyacrylic ester

Excellent long wave leveling effect and defoaming capability.

0.2-0.8%(for formula)
NEO-3177 Fluorine modified polyacrylic ester Excellent wetting property of base material, leveling performance and appliance for middle and high polarities. 0.3-1.0%(for formula)
Organic silicon NEO-3300

Polyether modified organic silicon

Versatility, excellent leveling performance and high leveling speed.

0.2-1.0%(for formula)
NEO-3606 Aralkyl modified organic silicon

Excellent leveling performance, aluminum powder and pearl powder directing properties;
excellent defoaming performance, especially used for epoxy auto-leveling systems.

0.1-0.3%(for formula)
3,Defoaming agents
Polymer NEO-5070

Non-silicon polymer

favorable effects for UPE and epoxy auto-leveling systems, and high defoaming performance;
considerable leveling effects.

0.2-1.0%(for formula)
NEO-5072 Organice Organice silicon+polymer Special effects for epoxy auto-leveling systems, excellent defoaming and leveling performance. 0.2-1.0%(for formula)
Organic silicon NEO-5201 Modified organic silicon Balanced defoaming performance and compatibility; high safety. 0.2-0.8%(for formula)
Fluorine silicon NEO-5606 Fluorine silicon superpolymer

Favorable defoaming capability, especially bubble breaking capability.

0.1-0.5%(for formula)
NEO-5606D Fluorine silicon superpolymer Low odor type of NEO-5606D, with high defoaming capability. 0.1-0.5%(for formula)

    

 
 
Copyright ◎ 2011 Wuxi NEO Chemical Material Co.,Ltd All reserved.Address: Xizhang Tianrunyuan 8-6, Huishang District, Wuxi
Zip code:214000  Tel:+86-0510-81988298(Switchboard) Http://www.neoadditive.com E-mail:sales@neoadditive.com